{"title":"Low Temperature Hydronic Unit Heater","description":"\u003ch2\u003e\u003cstrong\u003eIntroduction\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eHorizontal delivery low temperature unit heaters are the most popular of all types. These units are ideal for heating buildings with large open areas and low ceilings. In high ceiling open areas we recommend using stratification fans with these units. They are used to counter heat loss along outside building walls, especially where windows are present.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eConnections – Female type permits direct connection of unit heater to the piping and eliminates the need for additional fittings.\u003c\/li\u003e\n\u003cli\u003eWater or PG Mixture temperature can be as high as 180°F, however Unit Heaters are rated for 122°F Supply Fluid Temperature.\u003c\/li\u003e\n\u003cli\u003eVertical Fins – Less opportunity for dust and dirt to collect. Reduces cleaning. Fins die-formed for added strength and heat transfer.\u003c\/li\u003e\n\u003cli\u003eCoil – All air passes through coil. Heating is uniform. Design assures maximum control over air delivery and temperature of air leaving the heater. Aluminum fins die-formed for added strength – increased heat transfer. Fins mechanically bonded to serpentine copper tube.\u003c\/li\u003e\n\u003cli\u003eMotor – All motors are enclosed air over. Single phase and explosion-proof types include built in thermal overload protection. Selected and tested for operation on specific unit heater models. All motor wiring is terminated in an electrical junction box either supplied on the unit heater casing, or as an integral part of the motor.\u003c\/li\u003e\n\u003cli\u003eFan – Lightweight. Blades accurately balanced and pitched to move air quietly and positively – with minimum power requirement.\u003c\/li\u003e\n\u003cli\u003eDeflector Blades – Adjustable horizontal air-deflector blades are standard. \u003c\/li\u003e\n\u003cli\u003eSafety Fan Guard – Standard equipment. Bolted to rear casing, steel rod fan guard completely surrounds the fan offering constant protection.\u003c\/li\u003e\n\u003cli\u003eCasings – Baked-on gray-green polyester or Hammertone Beige powdercoat paint is applied over rust-and corrosionresistance- treated steel for long life.\u003c\/li\u003e\n\u003c\/ol\u003e","products":[{"product_id":"hydronic-unit-heater-16-7mbh-122-f-water-supply-temperature","title":"Hydronic Unit Heater HCH22 - 16.7MBH - 122°F Water Supply Temperature (Lead Time 6-8 Weeks)","description":"\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eDimensions\u003c\/li\u003e\n\u003cli\u003eTechnical Dcouments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003ch2\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003eSpecifications\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eUnits: Self-contained, factory assembled, pre-wired unit consisting of cabinet with air deflection louvers, supply fan, motor, and condenser.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eCoating: Electrostatically applied baked on Hammertone-Beige corrosion resistant, polyester powder coat paint that meets the following tests: 500 hours of salt spray as defined in ASTM B117, Adhesion\/crosshatch tape tests as defined in ASTM D3359, Method B, Rating 5B and Will not crack or peel when test panel is bent around a 1\/8 inch arbor.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eCondenser: Condenser coils are of the extended surface type of serpentine design, utilizing aluminum fins and DLP-type copper tubes. Tubes are mechanically bonded to the collars of the fins. The condensers are warranted for operation at steam or hot water pressures up to 150 pounds per square inch gauge and\/or temperatures up to 375°F. All coils are leak tested at 165 to 200 psig, air under water. Fins are continuous across the width and depth of the condenser and are vertically oriented to minimize the collection of dirt and dust. Coils are of serpentine design with horizontal tubes, vertical fins and side supply and return. All tube bends are brazed. All tubes have individual expansion bends. Copper tubes are 1\/2\" O.D. with 0.016\" wall thickness.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eMotor: Single motor with a supply voltage of 115\/60\/1 and horsepower of 1\/25 as indicated on the equipment schedule and manufactured in accordance with NEMA standards for continuous fan duty type applications. Must be enclosed air over and single phase motors will have built in thermal overload protection. Will be mounted to the unit with rubber vibration absorbing material. The entire length of the line voltage motor leads will be shielded and terminate in a factory supplied junction box mounted on the unit or integral to the motor.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eFan\/Fan Guards: Fans AMCA rated direct drive, aluminum blade, steel hub propeller will be statically and dynamically balanced. Unit shall be equipped with a safety fan guard.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eAccessories: The following items are to be field installed in accordance with the manufacturer's instructions:  Room Thermostat: Single-stage, 16 amp @ 115V; 8 amp @ 230V. 40-90°F range.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eOperating Conditions at 122°F:\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eModel Number: HCH 22SB01SA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eBtu\/Hr Output :16,702\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eAir Flow (CFM): 370\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eOutlet Velocity (fpm): 408\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eEntering Air Temp. (°F): 60\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eFinal Air Temp. (°F): 101\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eFluid Type (Steam or Hot Water): Hot Water Low Temp\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eEntering Water Temp. (°F): 122\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eFluid: Water\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eWater Flow Rate (GPM): 3.3\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eWater Pressure Drop (Ft of Water): 11.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eWater Temp Drop (°F): 10.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eSupply Voltage: 115\/60\/1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eMotor Type Enclosed Air Over with Thermal Overload\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eMotor HP: 1\/25\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eMotor RPM: 1,550\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eUnit Amps: 0.53\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/HCH-22.png?v=1714066585\" style=\"font-size: 0.875rem;\"\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/HCH-22-Submittal.pdf?v=1714067346\" title=\"Submittal\" rel=\"noopener\" style=\"font-size: 0.875rem;\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_2_9692b64e-67f8-41db-8db1-a3008ce990f1.png?v=1714067150\"\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e   \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-150.pdf?v=1714067389\" title=\"Manual\" rel=\"noopener\" style=\"font-size: 0.875rem;\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_3_5f00fe2b-1d51-4aee-9efa-74cd3dbbe9cf.png?v=1714067278\" alt=\"\"\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e   \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-558.pdf?v=1714067389\" title=\"O\u0026amp;M Manual\" rel=\"noopener\" style=\"font-size: 0.875rem;\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_4_4398fe88-9d10-4b09-b8e8-e62d61fcf09e.png?v=1714067522\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hydro Solar Innovative Energy","offers":[{"title":"Heating Only","offer_id":47246447083766,"sku":"520122016","price":2540.0,"currency_code":"CAD","in_stock":true},{"title":"Heating \u0026 Cooling","offer_id":47246447116534,"sku":"520122017","price":3198.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/hydronic-unit-heater-16-7mbh-122-f-water-supply-temperature-40442603929846.png?v=1714066071"},{"product_id":"hydronic-unit-heater-hch39-30mbh-122-f-water-supply-temperature-lead-time-6-8-weeks","title":"Hydronic Unit Heater HCH39 - 30MBH - 122°F Water Supply Temperature (Lead Time 6-8 Weeks)","description":"\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eDimensions\u003c\/li\u003e\n\u003cli\u003eTechnical Dcouments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003ch2\u003e\n\u003cspan style=\"font-size: 0.875rem;\"\u003eSpecifications\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eUnits: Self-contained, factory assembled, pre-wired unit consisting of cabinet with air deflection louvers, supply fan, motor, and condenser.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eCoating: Electrostatically applied baked on Hammertone-Beige corrosion resistant, polyester powder coat paint that meets the following tests: 500 hours of salt spray as defined in ASTM B117, Adhesion\/crosshatch tape tests as defined in ASTM D3359, Method B, Rating 5B and Will not crack or peel when test panel is bent around a 1\/8 inch arbor.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eCondenser: Condenser coils are of the extended surface type of serpentine design, utilizing aluminum fins and DLP-type copper tubes. Tubes are mechanically bonded to the collars of the fins. The condensers are warranted for operation at steam or hot water pressures up to 150 pounds per square inch gauge and\/or temperatures up to 375°F. All coils are leak tested at 165 to 200 psig, air under water. Fins are continuous across the width and depth of the condenser and are vertically oriented to minimize the collection of dirt and dust. Coils are of serpentine design with horizontal tubes, vertical fins and side supply and return. All tube bends are brazed. All tubes have individual expansion bends. Copper tubes are 1\/2\" O.D. with 0.016\" wall thickness.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eMotor: Single motor with a supply voltage of 115\/60\/1 and horsepower of 1\/25 as indicated on the equipment schedule and manufactured in accordance with NEMA standards for continuous fan duty type applications. Must be enclosed air over and single phase motors will have built in thermal overload protection. Will be mounted to the unit with rubber vibration absorbing material. The entire length of the line voltage motor leads will be shielded and terminate in a factory supplied junction box mounted on the unit or integral to the motor.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eFan\/Fan Guards: Fans AMCA rated direct drive, aluminum blade, steel hub propeller will be statically and dynamically balanced. Unit shall be equipped with a safety fan guard.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eAccessories: The following items are to be field installed in accordance with the manufacturer's instructions:  Room Thermostat: Single-stage, 16 amp @ 115V; 8 amp @ 230V. 40-90°F range.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eOperating Conditions at 122°F:\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eModel Number: HCH 39SB01SA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eBtu\/Hr Output :29,615\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eAir Flow (CFM): 660\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eOutlet Velocity (fpm): 409\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eEntering Air Temp. (°F): 60\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eFinal Air Temp. (°F): 101\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eFluid Type (Steam or Hot Water): Hot Water Low Temp\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eEntering Water Temp. (°F): 122\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eFluid: Water\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eWater Flow Rate (GPM): 5.9\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eWater Pressure Drop (Ft of Water): 3.3\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eWater Temp Drop (°F): 10.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eSupply Voltage: 115\/60\/1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eMotor Type Enclosed Air Over with Thermal Overload\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eMotor HP: 1\/25\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eMotor RPM: 1,550\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eUnit Amps: 0.53\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cimg style=\"font-size: 0.875rem;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/HCH-22.png?v=1714066585\" alt=\"\"\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/HCH-39.pdf?v=1714069059\" target=\"_blank\" title=\"Submittal\" rel=\"noopener\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_2_9692b64e-67f8-41db-8db1-a3008ce990f1.png?v=1714067150\" alt=\"\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e   \u003c\/span\u003e\u003ca style=\"font-size: 0.875rem;\" rel=\"noopener\" title=\"Manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-150.pdf?v=1714067389\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_3_5f00fe2b-1d51-4aee-9efa-74cd3dbbe9cf.png?v=1714067278\"\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e   \u003c\/span\u003e\u003ca style=\"font-size: 0.875rem;\" rel=\"noopener\" title=\"O\u0026amp;M Manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-558.pdf?v=1714067389\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_4_4398fe88-9d10-4b09-b8e8-e62d61fcf09e.png?v=1714067522\" alt=\"\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hydro Solar Innovative Energy","offers":[{"title":"Heating Only","offer_id":47246449279222,"sku":"520139030","price":3140.0,"currency_code":"CAD","in_stock":true},{"title":"Heating \u0026 Cooling","offer_id":47246449311990,"sku":"520139031","price":3744.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/hydronic-unit-heater-hch39-30mbh-122-f-water-supply-temperature-lead-time-6-8-weeks-40442722484470.png?v=1714069309"},{"product_id":"hydronic-unit-heater-hch67-51mbh-122-f-water-supply-temperature-lead-time-6-8-weeks","title":"Hydronic Unit Heater HCH67 - 51MBH - 122°F Water Supply Temperature (Lead Time 6-8 Weeks)","description":"\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eDimensions\u003c\/li\u003e\n\u003cli\u003eTechnical Documents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003ch2\u003e\n\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eSpecifications\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eUnits: Self-contained, factory assembled, pre-wired unit consisting of cabinet with air deflection louvers, supply fan, motor, and condenser.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eCoating: Electrostatically applied baked on Hammertone-Beige corrosion resistant, polyester powder coat paint that meets the following tests: 500 hours of salt spray as defined in ASTM B117, Adhesion\/crosshatch tape tests as defined in ASTM D3359, Method B, Rating 5B and Will not crack or peel when test panel is bent around a 1\/8 inch arbor.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eCondenser: Condenser coils are of the extended surface type of serpentine design, utilizing aluminum fins and DLP-type copper tubes. Tubes are mechanically bonded to the collars of the fins. The condensers are warranted for operation at steam or hot water pressures up to 150 pounds per square inch gauge and\/or temperatures up to 375°F. All coils are leak tested at 165 to 200 psig, air under water. Fins are continuous across the width and depth of the condenser and are vertically oriented to minimize the collection of dirt and dust. Coils are of serpentine design with horizontal tubes, vertical fins and side supply and return. All tube bends are brazed. All tubes have individual expansion bends. Copper tubes are 1\/2\" O.D. with 0.016\" wall thickness.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMotor: Single motor with a supply voltage of 115\/60\/1 and horsepower of 1\/25 as indicated on the equipment schedule and manufactured in accordance with NEMA standards for continuous fan duty type applications. Must be enclosed air over and single phase motors will have built in thermal overload protection. Will be mounted to the unit with rubber vibration absorbing material. The entire length of the line voltage motor leads will be shielded and terminate in a factory supplied junction box mounted on the unit or integral to the motor.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eFan\/Fan Guards: Fans AMCA rated direct drive, aluminum blade, steel hub propeller will be statically and dynamically balanced. Unit shall be equipped with a safety fan guard.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eAccessories: The following items are to be field installed in accordance with the manufacturer's instructions:  Room Thermostat: Single-stage, 16 amp @ 115V; 8 amp @ 230V. 40-90°F range.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eOperating Conditions at 122°F:\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eModel Number: HCH 67SB01SA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eBtu\/Hr Output :51,160\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eAir Flow (CFM): 1,150\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eOutlet Velocity (fpm): 456\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eEntering Air Temp. (°F): 60\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eFinal Air Temp. (°F): 100\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eFluid Type (Steam or Hot Water): Hot Water Low Temp\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eEntering Water Temp. (°F): 122\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eFluid: Water\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eWater Flow Rate (GPM): 10.2\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eWater Pressure Drop (Ft of Water): 5.8\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eWater Temp Drop (°F): 10.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eSupply Voltage: 115\/60\/1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMotor Type Enclosed Air Over with Thermal Overload\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMotor HP: 1\/6\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMotor RPM: 1,075\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eUnit Amps: 2-2.5\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/HCH-22.png?v=1714066585\" style=\"font-size: 0.875rem;\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/HCH-22.png?v=1714066585\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca rel=\"noopener\" title=\"Submittal\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/HCH67.pdf?v=1714069950\" target=\"_blank\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_2_9692b64e-67f8-41db-8db1-a3008ce990f1.png?v=1714067150\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_2_9692b64e-67f8-41db-8db1-a3008ce990f1.png?v=1714067150\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e   \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-150.pdf?v=1714067389\" title=\"Manual\" rel=\"noopener\" style=\"font-size: 0.875rem;\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-150.pdf?v=1714067389\" data-mce-style=\"font-size: 0.875rem;\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_3_5f00fe2b-1d51-4aee-9efa-74cd3dbbe9cf.png?v=1714067278\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_3_5f00fe2b-1d51-4aee-9efa-74cd3dbbe9cf.png?v=1714067278\"\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e   \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-558.pdf?v=1714067389\" title=\"O\u0026amp;M Manual\" rel=\"noopener\" style=\"font-size: 0.875rem;\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-558.pdf?v=1714067389\" data-mce-style=\"font-size: 0.875rem;\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_4_4398fe88-9d10-4b09-b8e8-e62d61fcf09e.png?v=1714067522\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_4_4398fe88-9d10-4b09-b8e8-e62d61fcf09e.png?v=1714067522\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hydro Solar Innovative Energy","offers":[{"title":"Default Title","offer_id":46504417722614,"sku":"520167051","price":4322.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/hydronic-unit-heater-hch67-51mbh-122-f-water-supply-temperature-lead-time-6-8-weeks-40447966904566.png?v=1714158229"},{"product_id":"hydronic-unit-heater-hch104-80mbh-122-f-water-supply-temperature-lead-time-6-8-weeks","title":"Hydronic Unit Heater HCH104 - 80MBH - 122°F Water Supply Temperature (Lead Time 6-8 Weeks)","description":"\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eDimensions\u003c\/li\u003e\n\u003cli\u003eTechnical Dcouments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003ch2\u003e\n\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eSpecifications\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eUnits: Self-contained, factory assembled, pre-wired unit consisting of cabinet with air deflection louvers, supply fan, motor, and condenser.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eCoating: Electrostatically applied baked on Hammertone-Beige corrosion resistant, polyester powder coat paint that meets the following tests: 500 hours of salt spray as defined in ASTM B117, Adhesion\/crosshatch tape tests as defined in ASTM D3359, Method B, Rating 5B and Will not crack or peel when test panel is bent around a 1\/8 inch arbor.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eCondenser: Condenser coils are of the extended surface type of serpentine design, utilizing aluminum fins and DLP-type copper tubes. Tubes are mechanically bonded to the collars of the fins. The condensers are warranted for operation at steam or hot water pressures up to 150 pounds per square inch gauge and\/or temperatures up to 375°F. All coils are leak tested at 165 to 200 psig, air under water. Fins are continuous across the width and depth of the condenser and are vertically oriented to minimize the collection of dirt and dust. Coils are of serpentine design with horizontal tubes, vertical fins and side supply and return. All tube bends are brazed. All tubes have individual expansion bends. Copper tubes are 1\/2\" O.D. with 0.016\" wall thickness.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMotor: Single motor with a supply voltage of 115\/60\/1 and horsepower of 1\/25 as indicated on the equipment schedule and manufactured in accordance with NEMA standards for continuous fan duty type applications. Must be enclosed air over and single phase motors will have built in thermal overload protection. Will be mounted to the unit with rubber vibration absorbing material. The entire length of the line voltage motor leads will be shielded and terminate in a factory supplied junction box mounted on the unit or integral to the motor.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eFan\/Fan Guards: Fans AMCA rated direct drive, aluminum blade, steel hub propeller will be statically and dynamically balanced. Unit shall be equipped with a safety fan guard.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eAccessories: The following items are to be field installed in accordance with the manufacturer's instructions:  Room Thermostat: Single-stage, 16 amp @ 115V; 8 amp @ 230V. 40-90°F range.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eOperating Conditions at 122°F:\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eModel Number: HCH 104SB01SA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eBtu\/Hr Output :79,489\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eAir Flow (CFM): 1,830\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eOutlet Velocity (fpm): 503\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eEntering Air Temp. (°F): 60\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eFinal Air Temp. (°F): 99\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eFluid Type (Steam or Hot Water): Hot Water Low Temp\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eEntering Water Temp. (°F): 122\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eFluid: Water\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eWater Flow Rate (GPM): 15.9\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eWater Pressure Drop (Ft of Water): 10.6\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eWater Temp Drop (°F): 10.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eSupply Voltage: 115\/60\/1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMotor Type Enclosed Air Over with Thermal Overload\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMotor HP: 1\/6\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMotor RPM: 1,075\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eUnit Amps: 2-2.5\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/HCH-22.png?v=1714066585\" style=\"font-size: 0.875rem;\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/HCH-22.png?v=1714066585\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/HCH-104.pdf?v=1714069950\" target=\"_blank\" title=\"Submittal\" rel=\"noopener\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_2_9692b64e-67f8-41db-8db1-a3008ce990f1.png?v=1714067150\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_2_9692b64e-67f8-41db-8db1-a3008ce990f1.png?v=1714067150\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e   \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-150.pdf?v=1714067389\" title=\"Manual\" rel=\"noopener\" style=\"font-size: 0.875rem;\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-150.pdf?v=1714067389\" data-mce-style=\"font-size: 0.875rem;\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_3_5f00fe2b-1d51-4aee-9efa-74cd3dbbe9cf.png?v=1714067278\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_3_5f00fe2b-1d51-4aee-9efa-74cd3dbbe9cf.png?v=1714067278\"\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e   \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-558.pdf?v=1714067389\" title=\"O\u0026amp;M Manual\" rel=\"noopener\" style=\"font-size: 0.875rem;\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-558.pdf?v=1714067389\" data-mce-style=\"font-size: 0.875rem;\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_4_4398fe88-9d10-4b09-b8e8-e62d61fcf09e.png?v=1714067522\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_4_4398fe88-9d10-4b09-b8e8-e62d61fcf09e.png?v=1714067522\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hydro Solar Innovative Energy","offers":[{"title":"Default Title","offer_id":46504420409590,"sku":"5201104080","price":5455.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/hydronic-unit-heater-hch104-80mbh-122-f-water-supply-temperature-lead-time-6-8-weeks-40447976669430.png?v=1714158587"},{"product_id":"hydronic-unit-heater-hch170-129mbh-122-f-water-supply-temperature-lead-time-6-8-weeks","title":"Hydronic Unit Heater HCH170 - 129MBH - 122°F Water Supply Temperature (Lead Time 6-8 Weeks)","description":"\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eDimensions\u003c\/li\u003e\n\u003cli\u003eTechnical Dcouments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003ch2\u003e\n\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eSpecifications\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eUnits: Self-contained, factory assembled, pre-wired unit consisting of cabinet with air deflection louvers, supply fan, motor, and condenser.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eCoating: Electrostatically applied baked on Hammertone-Beige corrosion resistant, polyester powder coat paint that meets the following tests: 500 hours of salt spray as defined in ASTM B117, Adhesion\/crosshatch tape tests as defined in ASTM D3359, Method B, Rating 5B and Will not crack or peel when test panel is bent around a 1\/8 inch arbor.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eCondenser: Condenser coils are of the extended surface type of serpentine design, utilizing aluminum fins and DLP-type copper tubes. Tubes are mechanically bonded to the collars of the fins. The condensers are warranted for operation at steam or hot water pressures up to 150 pounds per square inch gauge and\/or temperatures up to 375°F. All coils are leak tested at 165 to 200 psig, air under water. Fins are continuous across the width and depth of the condenser and are vertically oriented to minimize the collection of dirt and dust. Coils are of serpentine design with horizontal tubes, vertical fins and side supply and return. All tube bends are brazed. All tubes have individual expansion bends. Copper tubes are 1\/2\" O.D. with 0.016\" wall thickness.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMotor: Single motor with a supply voltage of 115\/60\/1 and horsepower of 1\/25 as indicated on the equipment schedule and manufactured in accordance with NEMA standards for continuous fan duty type applications. Must be enclosed air over and single phase motors will have built in thermal overload protection. Will be mounted to the unit with rubber vibration absorbing material. The entire length of the line voltage motor leads will be shielded and terminate in a factory supplied junction box mounted on the unit or integral to the motor.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eFan\/Fan Guards: Fans AMCA rated direct drive, aluminum blade, steel hub propeller will be statically and dynamically balanced. Unit shall be equipped with a safety fan guard.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eAccessories: The following items are to be field installed in accordance with the manufacturer's instructions:  Room Thermostat: Single-stage, 16 amp @ 115V; 8 amp @ 230V. 40-90°F range.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eOperating Conditions at 122°F:\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eModel Number: HCH 170SB01SA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eBtu\/Hr Output :128,604\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eAir Flow (CFM): 2,780\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eOutlet Velocity (fpm): 475\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eEntering Air Temp. (°F): 60\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eFinal Air Temp. (°F): 102\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eFluid Type (Steam or Hot Water): Hot Water Low Temp\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eEntering Water Temp. (°F): 122\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eFluid: Water\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eWater Flow Rate (GPM): 25.7\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eWater Pressure Drop (Ft of Water): 16\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eWater Temp Drop (°F): 10.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eSupply Voltage: 115\/60\/1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMotor Type Enclosed Air Over with Thermal Overload\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMotor HP: 1\/3\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMotor RPM: 1,140\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eUnit Amps: 4.2-4.6\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cimg style=\"font-size: 0.875rem;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/HCH-22.png?v=1714066585\" alt=\"\" data-mce-style=\"font-size: 0.875rem;\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/HCH-22.png?v=1714066585\"\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca rel=\"noopener\" title=\"Submittal\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/HCH-170.pdf?v=1714069951\" target=\"_blank\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_2_9692b64e-67f8-41db-8db1-a3008ce990f1.png?v=1714067150\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_2_9692b64e-67f8-41db-8db1-a3008ce990f1.png?v=1714067150\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e   \u003c\/span\u003e\u003ca style=\"font-size: 0.875rem;\" rel=\"noopener\" title=\"Manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-150.pdf?v=1714067389\" target=\"_blank\" data-mce-style=\"font-size: 0.875rem;\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-150.pdf?v=1714067389\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_3_5f00fe2b-1d51-4aee-9efa-74cd3dbbe9cf.png?v=1714067278\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_3_5f00fe2b-1d51-4aee-9efa-74cd3dbbe9cf.png?v=1714067278\"\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e   \u003c\/span\u003e\u003ca style=\"font-size: 0.875rem;\" rel=\"noopener\" title=\"O\u0026amp;M Manual\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-558.pdf?v=1714067389\" target=\"_blank\" data-mce-style=\"font-size: 0.875rem;\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-558.pdf?v=1714067389\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_4_4398fe88-9d10-4b09-b8e8-e62d61fcf09e.png?v=1714067522\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_4_4398fe88-9d10-4b09-b8e8-e62d61fcf09e.png?v=1714067522\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hydro Solar Innovative Energy","offers":[{"title":"Default Title","offer_id":46504427061494,"sku":"5201170129","price":9580.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/hydronic-unit-heater-hch170-129mbh-122-f-water-supply-temperature-lead-time-6-8-weeks-40447994527990.png?v=1714158948"},{"product_id":"hydronic-unit-heater-hch195-147mbh-122-f-water-supply-temperature-lead-time-6-8-weeks-copy","title":"Hydronic Unit Heater HCH195 - 147MBH - 122°F Water Supply Temperature (Lead Time 6-8 Weeks)","description":"\u003c!-- more --\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli class=\"active\"\u003eDescription\u003c\/li\u003e\n\u003cli\u003eDimensions\u003c\/li\u003e\n\u003cli\u003eTechnical Dcouments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\"\u003e\n\u003ch2\u003e\n\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eSpecifications\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eUnits: Self-contained, factory assembled, pre-wired unit consisting of cabinet with air deflection louvers, supply fan, motor, and condenser.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eCoating: Electrostatically applied baked on Hammertone-Beige corrosion resistant, polyester powder coat paint that meets the following tests: 500 hours of salt spray as defined in ASTM B117, Adhesion\/crosshatch tape tests as defined in ASTM D3359, Method B, Rating 5B and Will not crack or peel when test panel is bent around a 1\/8 inch arbor.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eCondenser: Condenser coils are of the extended surface type of serpentine design, utilizing aluminum fins and DLP-type copper tubes. Tubes are mechanically bonded to the collars of the fins. The condensers are warranted for operation at steam or hot water pressures up to 150 pounds per square inch gauge and\/or temperatures up to 375°F. All coils are leak tested at 165 to 200 psig, air under water. Fins are continuous across the width and depth of the condenser and are vertically oriented to minimize the collection of dirt and dust. Coils are of serpentine design with horizontal tubes, vertical fins and side supply and return. All tube bends are brazed. All tubes have individual expansion bends. Copper tubes are 1\/2\" O.D. with 0.016\" wall thickness.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMotor: Single motor with a supply voltage of 115\/60\/1 and horsepower of 1\/25 as indicated on the equipment schedule and manufactured in accordance with NEMA standards for continuous fan duty type applications. Must be enclosed air over and single phase motors will have built in thermal overload protection. Will be mounted to the unit with rubber vibration absorbing material. The entire length of the line voltage motor leads will be shielded and terminate in a factory supplied junction box mounted on the unit or integral to the motor.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eFan\/Fan Guards: Fans AMCA rated direct drive, aluminum blade, steel hub propeller will be statically and dynamically balanced. Unit shall be equipped with a safety fan guard.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eAccessories: The following items are to be field installed in accordance with the manufacturer's instructions:  Room Thermostat: Single-stage, 16 amp @ 115V; 8 amp @ 230V. 40-90°F range.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eOperating Conditions at 122°F:\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eModel Number: HCH 195SB01SA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eBtu\/Hr Output :147,185\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eAir Flow (CFM): 3,200\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eOutlet Velocity (fpm): 455\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eEntering Air Temp. (°F): 60\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eFinal Air Temp. (°F): 102\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eFluid Type (Steam or Hot Water): Hot Water Low Temp\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eEntering Water Temp. (°F): 122\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eFluid: Water\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eWater Flow Rate (GPM): 29.4\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eWater Pressure Drop (Ft of Water): 22.3\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eWater Temp Drop (°F): 10.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eSupply Voltage: 115\/60\/1\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMotor Type Enclosed Air Over with Thermal Overload\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMotor HP: 1\/3\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eMotor RPM: 1,140\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003eUnit Amps: 4.2-4.6\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/HCH-22.png?v=1714066585\" style=\"font-size: 0.875rem;\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/HCH-22.png?v=1714066585\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca rel=\"noopener\" title=\"Submittal\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/HCH-195.pdf?v=1714069950\" target=\"_blank\"\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_2_9692b64e-67f8-41db-8db1-a3008ce990f1.png?v=1714067150\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_2_9692b64e-67f8-41db-8db1-a3008ce990f1.png?v=1714067150\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e   \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-150.pdf?v=1714067389\" title=\"Manual\" rel=\"noopener\" style=\"font-size: 0.875rem;\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-150.pdf?v=1714067389\" data-mce-style=\"font-size: 0.875rem;\" target=\"_blank\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_3_5f00fe2b-1d51-4aee-9efa-74cd3dbbe9cf.png?v=1714067278\" alt=\"\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_3_5f00fe2b-1d51-4aee-9efa-74cd3dbbe9cf.png?v=1714067278\"\u003e\u003c\/a\u003e\u003cspan style=\"font-size: 0.875rem;\" data-mce-style=\"font-size: 0.875rem;\"\u003e   \u003c\/span\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-558.pdf?v=1714067389\" title=\"O\u0026amp;M Manual\" rel=\"noopener\" style=\"font-size: 0.875rem;\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/1-558.pdf?v=1714067389\" data-mce-style=\"font-size: 0.875rem;\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_4_4398fe88-9d10-4b09-b8e8-e62d61fcf09e.png?v=1714067522\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/Submittal_4_4398fe88-9d10-4b09-b8e8-e62d61fcf09e.png?v=1714067522\"\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Hydro Solar Innovative Energy","offers":[{"title":"Default Title","offer_id":46504427847926,"sku":"5201195147","price":10264.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/files\/hydronic-unit-heater-hch195-147mbh-122-f-water-supply-temperature-lead-time-6-8-weeks-copy-40448008716534.png?v=1714159308"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0010\/8458\/8093\/collections\/Unit_Heaters.png?v=1714008507","url":"https:\/\/hydrosolar.ca\/en-us\/collections\/low-temperature-hydronic-unit-heater.oembed","provider":"Hydro Solar Innovative Energy","version":"1.0","type":"link"}