Design Request Dehumidifier Selection Tool Swimming Pool Heat Loss Heat Pump Warranty Registration Before & After Sales Services Shipping Policy Corporate Culture
Skip to content
120V / Expansion Tank Included DIY Solar Pumping Station Grundfos 26-150 F

DIY Solar Pumping Station Grundfos 26-150 F - 45 ft Head - Single 3 Speed Cast Iron Pump - 3/4" Pipe

$ 1,460.82 CAD
Voltage
Expansion Tank

Notify me when back in stock

Payments:  Credit Cards paypal bank transfer

Return Policy: We accept return within 30 days of receipt of your orders. Restocking fee applies on some returned Products. Returned Items shall have intact labels, packages and shall not have been used. for more info.

  • refund Full refund if you do not receive your ordered items. 
  • refund Partial Refund for partially not received or damaged items
  • Introduction & Components
  • Pump Curve & Specifications
  • Technical Documents

  • What is a DIY Pumping Station?

    Pumping Stations are an assembly of pump and fittings destined to circulate heat transfer fluid between Heat Source (Vacuum Tube Solar Collector) and a Heat Sink (Solar thermal Storage tank). Most Factory Pre-assembled pumping stations are expensive to buy and offer little or low pumping head (less than 18 ft in total head). For Installation requiring multiple solar panel with longer distances between heat source and heat sink, client is forced to either buy multiple solar pumping stations or split his solar installation into a set of parallel independent ones. In both cases, project cost increases exponentially.

    Our DIY Pumping Station offer more pumping head without the frills of factory built pumping stations that customers never make use of. Our DIY Pumping Stations are shipped in pieces (completely Knocked down) and must be assembled by installer.

    Components 

    Description Qty Unit
    Pumping Station Without Expansion Tank
    Grundfos Pump 26-150 F 1 Pc
    Aquamotion FK75 - Cast Iron Flange Adapters 3/4" NPT 1 Pair
    3/4" NPT x 3/4" BSPT Nipple 2 Pc
    3/4" BSPT Solar Filling Valve with Garden Hose Connectors 1 Pc
    3/4" BSPT threaded Female Tee 1 Pc
    3/4" BSPT threaded Male Tee 1 Pc
    3/4" Female BSPT x 3/4" Male BSPT Ball Valve for Expansion Tank Connection 1 Pc
    3/4" Female BSPT x 3/4" Female BSPT Ball Valve 1 Pc
    3/4" BSPT x 3/4" BSPT Nipple 2 Pc
    Pressure Safety Valve 3/4" BSPT 1 Pc
    PSET2.120 - Expansion Tank Kit (Optional)
    3/4" BSPT Cir-Clip (Stainless Steel Washer, Brass Nut and Teflon Gasket) 2 Pc
    Coil Connection Piece 1 Pc
    Expansion Tank - 2.1 US Gallons - 3/4" NPT Male Threaded 1 Pc

     

  • Pump Curve & Specifications

    Grundfos Pump UPS 26-150 F Cast Iron

    This pump is the Gundfos UPS26-150 F (95906630). It is made of cast iron, has flanged connections and operates on 115 or 230 VAC, 60Hz.
     

    Small Water Circulation Pump

    Grundfos UP pumps are small circulators perfect for residential or light Commercial use. The UP can be applied to a variety of circulator needs including heating, cooling, and residential hot-water systems. These traditional circulators provide all the solutions in one package. Simply install your dedicated return line and let our Grundfos UP pump do the rest!
     
    The UP is available in a variety of materials and performance capabilities to meet the needs of your application.
     

    Features & Benefits

      • Quick and easy installation
      • Whisper quiet operation
      • Unique wet rotor design

    Applications

      • Solar heating system
      • Heating systems
      • Domestic hot-water systems
      • Cooling systems

    Pump Curve

    Grundfos Pump UPS 26-150 F Curve

  • Data Sheet