DX-Air - Commercial Pool Dehumidifiers
DXair offers a unique line of high-grade 304 Stainless Steel dehumidification systems for indoor pools. Their heat recovery systems include cooling and pool heat recovery, designed to enhance efficiency and lower operating costs.
The Dehumidifier SS Series Models available are the standard model and the take apart construction (TAC) model:
- The standard model is available in capacities ranging from 2 tons (21,600 BTU/hr) to 10 tons (133,600 BTU/hr) where the airflow ranges from 800 to 4000 CFM.
- The standard SS Series can remove moisture of up to 52.3 lb/hr.
- The standard SS Series models are available in 208-230V/1/60, 208-230V/3/60, 460-480V/3/60 and 575V/3/60.
- The take apart consruction model is available in capacities ranging from 10 tons (111,400BTU/hr) to 20 tons (267,200 BTU/hr) where the airflow ranges from 4000 to 8000 CFM.
- The TAC series can remove moisture of up to 104.6 lb/hr.
- The TAC Series models are available in 208-230V/1/60, 208-230V/3/60, 460-480V/3/60 and 575V/3/60.
- Most of the standard model and the TAC model offer the option to be built for higher CFM capacbilities allowing them to function at higher static pressures for the same capcities.
- The evaporator coils are accessible and cleanable.
- These units have the smallest footprint in the industry with the lowest industry refrigerant capacity (Green/LEED).
- The dehumidifier includes a Honeywell VisionPRO 8000 Thermostat.
Together with the dehumidifier, either an air-cooled or water-cooled WITT condenser can be paired with the dehumidifier to reject heat to the outdoor air, when neither the pool room air nor pool water require heat. These condensers can either be small, large or part of multi-circuited condensors.