DIY Solar Pumping Station PSAMR3FV120- Single 3 Speed Cast Iron Pump - 20 ft Head - 3/4" Pipe
Return Policy: We accept return within 30 days of receipt of your orders. Restocking fee applies on some returned Products. Returned Items shall have intact labels, packages and shall not have been used. for more info.
- Full refund if you do not receive your ordered items.
- Partial Refund for partially not received or damaged items
What is a DIY Pumping Station?
Pumping Stations are an assembly of pump and fittings destined to circulate heat transfer fluid between Heat Source (Vacuum Tube Solar Collector) and a Heat Sink (Solar thermal Storage tank). Most Factory Pre-assembled pumping stations are expensive to buy and offer little or low pumping head (less than 18 ft in total head). For Installation requiring multiple solar panel with longer distances between heat source and heat sink, client is forced to either buy multiple solar pumping stations or split his solar installation into a set of parallel independent ones. In both cases, project cost increases exponentially.
Our DIY Pumping Station offer more pumping head without the frills of factory built pumping stations that customers never make use of. Our DIY Pumping Stations are shipped in pieces (completely Knocked down) and must be assembled by installer.
|PS-AMR3FV1-20 (Pumping Station without Expansion Tank)|
|Aquamotion AMR-3FV1 - Cast Iron 3 Speeds Pump with built in Check Valve (Rated 250⁰F)||1||Pc|
|Aquamotion FK75 - Cast Iron Flange Adapters 3/4" NPT||1||Pair|
|3/4" NPT x 3/4" BSPT Nipple||2||Pc|
|3/4" BSPT Solar Filling Valve with Garden Hose Connectors||1||Pc|
|3/4" BSPT threaded Female Tee||1||Pc|
|3/4" BSPT threaded Male Tee||1||Pc|
|3/4" Female BSPT x 3/4" Male BSPT Ball Valve for Expansion Tank Connection||1||Pc|
|3/4" Female BSPT x 3/4" Female BSPT Ball Valve||1||Pc|
|3/4" BSPT x 3/4" BSPT Nipple||2||Pc|
|Pressure Safety Valve 3/4" BSPT||1||Pc|
|PSET2.120 - Expansion Tank Kit (Optional)|
|3/4" BSPT Cir-Clip (Stainless Steel Washer, Brass Nut and Teflon Gasket)||2||Pc|
|3/4" Female BSPT x 3/4" Male BSPT Adapter||1||Pc|
|Flexible Corrugated Stainless Steel Pipe - 3/4" (20mm OD x 16mm ID) - Non Insulated - 18" Long||1||Pc|
|Expansion Tank - 2.1 US Gallons - 3/4" NPT Male Threaded||1||Pc|
Pump Curve & Specifications
AQUAMOTION AMR-3FV1 HYDRONIC CIRCULATION PUMP (SOLAR AND NON SOLAR CLOSED LOOP APPLICATION)
With Amp draws ranging from 0.46 amps to 0.79 amps the AMR offers high performance and high efficiency. AquaMotion’s universal 4-bolt flange design (with built in 25mm BICV check valve Rated 250 Degree Fahrenheit) reduces inventory and cost while simplifying installation.
The AMR circulator replaces Grundfos UPS15-58, Grundfos UPS15-42, Taco 008-F, Taco 0015-MSF , Wilo STAR S21, Xylem NRF-25, and Armstrong Astro 50-3.
- Maximum water temperature 1100C/2300F
- Maximum working pressure 125 psi
- Maximum ambient temperature with 2300F fluid is 1040F
- Minimum inlet pressure 2 psi
- Electrical Ratings 120V, 60Hz.
MATERIALS OF CONSTRUCTION
- STAINLESS STEEL: Wearring, bearing support, cartridge sleeve, rotor sleeve, rotor cover.
- STEEL: Motor housing
- ALUMINIM OXIDE CERAMIC: Shaft
- CARBON IMPREGNATED: Radial bearings
- CAST IRON: Pump housing (volute) (Closed Systems)
- STAINLESS AND LEAD FREE BRASS: Open systems
- EP (Ethylene Propylene Rubber): O-ring and gaskets
- POLYPROPYLENE: Impeller
Pump Technical Documents