Skip to content

Taco 0015E32F4 High Efficiency Wet Rotor ECM Circulator - 120V

$ 235.60 CAD

Notify me when back in stock

  • Description
  • Technical Documents
  • Introduction

    Taco 0015e3 is a variable speed, high-efficiency, wet rotor circulator with an ECM permanent magnet motor. It’s ideal for hydronic systems zoned with circulators or zone valves. With 3 easy settings, the 0015e3 delivers performance, reliability and ease of installation.


    • Max. Shut-off Head: 18 feet
    • Max. Flow: 16 gpm
    • Max. Operating Pressure: 125 psi (8.6 bar) •
    • Max. Water Temp: 230°F (110°C) •
    • Min. Water Temp: 36°F (2°C) •
    • Electrical specifications: Voltage: 120V, 60 Hz Single phase Max.
    • Operating Power: 44W Max. AMP Rating: 0.54
    • Equipped with a cast iron casing and should be used for closed loop systems only • Taco circulator pumps are for indoor use only
    • Acceptable for use with water or maximum of 50% water/glycol solution
    • Not for use on potable water or chilled water systems


    • BIO Barrier protects the pump from system contaminants
    • SureStart automatic unblocking and air purging mode
    • High-efficiency ECM motor uses up to 85% less electricity
    • IFC (Integral Flow Check) is included
    • 3 easy settings: LOW (5 ft. head), MEDIUM (10 ft. head), HIGH (18 ft. head)
    • 16 gpm max flow
    • Dual electrical knockouts and 6" stranded wire leads for no-fumble wiring
    • Double insulated
    • no ground wire needed
    • Whisper quiet operation